A pen-shaped atomizer, not a small perfume bottle
Most travel atomizers are a small bottle with a spray cap. This one is a thin glass tube, about six times as tall as it is wide, with the pump and a small cylinder cap sitting on top. It disappears into a pocket, a wash bag or an amenity kit, which is the whole point of a travel perfume atomizer.
It comes in two capacities, 5 ml and 10 ml, on the same body diameter, so a sampler program and a retail travel size can run off one component set. The body is glass, spray-coated and available in matte black or left clear, closed by a screw neck that you open to refill.
Sold empty and ready for your filling line. If you are sourcing refillable perfume atomizers for a brand or a hotel program, the specificaion below is what the part actually is - not a marketing description of it.
What goes wrong with travel atomizers, and how we build around it
Travel atomizers fail in predictable ways. The failures are rarely about the look of the bottle.
It leaks in the bag, not on the shelf
A travel atomizer spends its life on its side or upside down. The joint that matters is the seal between the pump and the screw neck, and the seat of the pump inside the collar. Bottles are assembled and checked as a complete unit, because a pump that passes on a loose bottle can still weep once it is screwed onto a filled one.
The pump feels cheap on the third press
A 5 ml bottle holds very little product, so the pump action is a large part of the user experience. Pump actuation and return are checked on the assembled unit rather than trusted from the component supplier's datasheet.
Refilling is where customers give up
The screw neck has to come off and go back on without cross-threading, and the pump has to re-seat so the next press sprays cleanly. The neck thread is inspected against a gauge, not by eye.
Thin glass that does not survive the post
A long thin glass tube is more exposed than a squat bottle. Bottles are bagged individually and packed in an export carton with a specification set to the packed weight; if your channel needs partitions or sleeves, that is quoted as a separate packing line.
A coating that scuffs in a pocket
The matte black finish is the first thing a user sees and the first thing to wear. Coated orders are matched to the physical sample you approve, and adhesion and scuff resistance are checked before packing.
What we check, and what we agree with you
The points this part can actually fail on are fill volume, pump actuation, cap fit, closure tightness, surface finish, and the packed carton. Which of these are inspected, at what sampling level, and in what record format is agreed with you at order confirmation - we do not assume your inspection plan, and we do not publish a test standard we have not been asked to work to.
Leak resistance is a design intent of the closure, not a certificate. If your program requires a specific leak test, a defined drop test, or a third-party inspection at the factory, put it in the order and we work to your document. The inspection image in this listing is our blank template: it shows the check items we work from, not a result for a batch.
We do not print pass badges or certification marks on product images. What you can rely on is the sample you signed off, the inspection scope written into your order, and the right to inspect.
The custom program: finish, logo and packaging
On the body: clear glass, frosted, matte, spray-coated color, with optional silk screen print, hot stamping, heat transfer, decal or decoration firing. On the metal: gold or silver finish on the collar, pump and cap, and the cap can be a matching metal cylinder or a translucent plastic cap if you want the atomizer to read as a sampler.
Logo and graphic customization start at 1,000 pcs, and custom packaging also starts at 1,000 pcs. That threshold is real - below it the artwork and packing setup cost dominates the order.
The packaging image in this listing is a concept: a foam tray with one narrow channel per atomizer, inside a rigid box, with a plain export carton. It is drawn to show what is possible. The tray is quoted and sampled per program and the final cavity is confirmed against the physical bottle before tooling - treat it as a starting point, not a stocked box.
Where a pen atomizer earns its place
Travel retail and duty-free sampler programs, hotel and airline amenity kits, discovery and sample sets for a fragrance launch, subscription and travel kits, and refillable travel companions for a full-size fragrance. It is also the format buyers ask for when they want a mini perfume spray bottle that does not look like a miniature of the retail bottle.
Note on fitment: this listing covers the bottle with its atomizer pump and cap. If your program needs a specific spray output or a different actuator, tell us at inquiry and we will confirm what is available on this neck - do not assume a standard pump will swap in.
MOQ and samples
Purchase orders start at 3,000 pcs for stock body colorways. Logo, graphic customization and custom packaging start at 1,000 pcs. Sample bottles are available for evaluation; a sample fee applies and the courier cost is on the buyer, which is standard for glass.
Message Shary with your capacity mix, metal finish and whether you need the tray and box, and you will get a quotation, a sampling plan and a lead time in one reply.
Buyer questions
Is it actually refillable?
Yes. The pump assembly unscrews from the screw neck, you refill the glass tube, and the pump screws back on. That is why the neck thread is gauge-checked.
Can I order 5 ml and 10 ml in one shipment?
Yes, both capacities share the same body diameter and closure, so they run in one batch and ship in one carton set. Each capacity needs to meet its own minimum.
Does it really not leak?
Leak resistance is a design property of the closure and we test tightness on the assembled unit. If your program needs a specific leak test written into the order, say so and we work to your standard rather than claim one.
Can the bottle be clear instead of black?
Yes. Clear, frosted and spray-coated colors are all available. Clear shows the internal dip tube, which some programs want and others do not.
Can you print my logo on such a thin bottle?
Yes, within the printable area. Send artwork and we will return a mockup showing the actual print area on this body before you commit.